Shooting Range Acoustic Consulting & Noise Control

Shooting Range Acoustic Consulting & Noise Control

Shooting Range Noise Sound transmission from gun ranges has become a growing concern as shooting sports increase in popularity, and firing ranges are built in close proximity to retail areas and residential districts. We work with developers, architects, engineers, and city planners to evaluate potential noise concerns from shooting facilities. Wave Engineering, Inc. evaluates new and existing ranges with computer modeling and on site sound measurements, and can assist with exterior noise, permitting, and compliance with state and local noise codes and ordinances. We can also recommend acoustic treatments to control noise and reverberation inside the range, retail, and classroom areas. For more information, please watch our video profile on gun range noise and acoustics, below… HVAC systems shown in this video are by Carey’s Small Arms Range Ventilation. To Get Help With Your Shooting Range Project Contact Us...
Are Your Video Conference Room Acoustics HD-Compatible? (Part Two)

Are Your Video Conference Room Acoustics HD-Compatible? (Part Two)

In a previous post, we discussed ways that the acoustics of a conference room can affect the audio quality of the video conferencing system. Here in Part 2 we will go over some general recommendations on designing the room to get the best sound from the system. Good Design Principles The three main pillars to good acoustical design for a video conference room are: 1. Low background noise 2. Low reverberation 3. Microphones located close to the talkers If you can provide those three items in all conference rooms, you can achieve the natural, immersive sound quality that your HD video conference system is capable of. Background noise The HVAC noise in the conference room should be less than 30 dBA or Noise Criteria (NC) 25. Most building HVAC systems will exceed this level unless care is taken to add lined duct, locate equipment away from the room, and use low air velocities. Many conference rooms have a glass wall looking outside or into a corridor or lobby area. Intruding noises like traffic or people talking outside the room can interfere with the conference too. Some conference areas are not even divided from the rest of the open office area, which is not a good idea for video conferencing. Reverberation An ideal conference room should have a reverberation time around 0.5 seconds. This is not possible in a room with a lot of hard surfaces like glass, drywall, concrete, or exposed metal deck. A reverberant room makes speech sound muddy and makes the background noise louder. Soft, sound absorbing materials are needed to control reverberation, and they should be...